Ballast Tank Cleaner/Mud & Silt Remover
Description:-
It is an odourless Colorless /Hazy Water White POLYMERIZED viscous liquid for Removal of sediments, silt and mud from Ballast Tank. Its polymerization dual effect mechanism help to prevent hard deposition of mud layer on the metal surface as well as keeps mud particle in a loose condition which causes more labour to clean.
APPLICATION: POLYELECTROLYTE conditioner is highly economical, non-toxic, non-polluting chemical its lower concentration effectiveness with water keeps it in very ECONOMICAL GRADE materials class.
1. Proven cost-effective
2. Ready-to-use
3. Concentrated formula
4. Very low usage rates as 5 ppm
5. Safe, aqueous product
6. Dosing equipment available
Field for Use:
1. Ballast Tanks
2. Double Bottom Tanks
3. Floating Dry-docks
4. Manual Tank Cleaning
5. Cooling Water Systems
Application:-
RXSOL-23-2900 may be fed full strength, or diluted with clean water, depending upon the application.
RXSOL-23-2900 works best when injected into ballast piping or the ballast pump discharge during ballasting. Rx Marine offers either automatic or semi-automatic injection systems. Each system consists of a 50 or 100 gallon supply tank, with high-pressure injection pumps
Connected to a DUBICHEM MARINE INTERNATIONAL. Special 316 SS injection nozzles are also supplied to assist in dispersing and mixing the chemical in the ballast pipes. Installation of these systems is straightforward. All that is required is to bolt or weld the tank in place, run tubing from the injection point, and provide shipboard power to the controller. Operation of these units is also easy. Standard systems need only to be turned on when the ballasting procedure begins, and off when the ballasting is finished. Automatic systems are designed to turn themselves on and off as needed, and require no operator assistance, except to check the holding tank level.
Applications such as tank cleaning, dry-docks and oncethrough cooling systems may require other types of injection systems.
Dosing Method: -
If product is regular used each time tanks are ballasted, a maintenance dosage of 2.5 Ltr/100 tones of ballast water is recommended. To clean heavy accumulation a dose rate of 10 Ltr Ballast Tank Cleaner per 100 tones of ballast water is recommended. Inject Mud & Silt Remover preferably into the suction line of the ballast or cooling water pump, to ensure thorough mixing with the incoming water. If possible, circulate the water through the tanks and the suspended mud and silt will be pumped out when de-ballasting.
Dubichem Marine International is a leading supplier, manufacturer and exporter of Ballast Tank Cleaner/Mud & Silt Remover in Dubai, Ajman, Abu- Dhabi, Sharjah, Fujairah, Turkey, Saudi Arabia, Qatar, Kuwait, United Arab Emirates, Oman, Singapore, Malaysia, Indonesia, Lebanon, Greece, India, Sudan, Ghana, Madagascar, Kenya, Nigeria, Zimbabwe, Uganda, Ethiopia, Namibia, Mauritius, South Africa,Europe & Globally for any queries mail us at dubichem@gmail.com and for more related products visit www.dubichem.com
