Air cooling is a method of dissipating heat. It works by expanding the surface area or increasing the flow of air over the object to be cooled, or both.Air Cooler Cleaner is very effective to removal of all contaminants. It anti corrosive properties. Air Cooler Cleaner has no impact cylinder oil films and it is completely combustible in the cylinder. It is a Light yellow colored neutral fluids, which emulsify with water and are safe in contact with all metals.
An example of the former is to add cooling fins to the surface of the object,... + continue reading
News and Events
Wednesday, March 7, 2018 - 13:42
Wednesday, March 7, 2018 - 13:00
Powder Activated Carbon
Powdered Activated carbon is characterized as having a mean molecule width (MPD) under 0.045mm (325US Mesh);
Fine mesh is characterized as having a molecule estimate transcendently in the vicinity of 0.045 and 0.180mm (80 and 325US Mesh).
Uses of powder Activated carbon
To treat little bunches;
In applications where just fractional treatment is wanted, as in hydrolysed vegetable protein decontamination;
In applications with high stream rates and low carbon measurement to stay away from capital... + continue reading
Wednesday, March 7, 2018 - 12:33
An Evaporator is a device in a process used to turn the liquid form of a chemical substance such as water into its gaseous-form/vapor. The liquid is evaporated, or vaporized, into a gas form of the targeted substance in that process.Evaporator Treatment is a new and patented polymer evaporator treatment that has been developed to alter the normal crystal habits of scale forming minerals.These minerals normally form a hard scale incrustation; however, with the use of Evaporator Treatment, the scale formation is... + continue reading
Wednesday, March 7, 2018 - 11:51
Hydrofluoric acid (HF) is the aqueous solution of hydrogen fluoride. It is also called fluoric acid or fluorhydric acid. Hydrofluoric acid is a solution of hydrogen fluoride (HF) in water. It is a colourless solution that is highly corrosive, capable of dissolving many materials, especially oxides. Hydrofluoric acid is classified as a weak acid because of its lower dissociation constant compared to the strong acids.
Hydrofluoric acid is a very strong, reactive and corrosive acid. It readily reacts with bases, acids... + continue reading
Wednesday, March 7, 2018 - 11:34
Sodium Tripolyphosphate (STPP) is also known as Pentasodium Triphosphate or Sodium Triphosphate. It is a sodium salt of Triphosphoric Acid. Manufactured by mixing Disodium Phosphate and Monosodium phosphate. STPP is used in a various range of application such as in Manufacturing of Cleaning Products, Food Preservatives, Water Treatment Facilities.
Application
1.) STPP acts as a powerful cleaning agent in the manufacture of cleaning products. It improves the ability of various ingredients in the detergent to... + continue reading
Wednesday, March 7, 2018 - 11:21
SAF-ACID descaling compound is an uncommon mix of sulfamic corrosive, wetting operator and shading pointer. The wetting specialist upgrades the activity of the sulfamic corrosive in expelling stores by its surface-dynamic cleaning properties. The shading marker gives a straightforward intends to deciding if the quality of the SAF-ACID arrangement is sufficient for viable, effective cleaning.
Highlights of SAF-ACID
Concentrated fluid
Contains an erosion inhibitor
Contains a wetting specialist
Contains shading marker
Free streaming... + continue reading
Wednesday, March 7, 2018 - 11:16
Polyethylene Glycol (PEG) is formed by the reaction of ethylene oxide and water under pressure in the presence of a catalyst. Chemical formula of Polyethylene glycol (PEG) is C2nH4n+2On+1. PEG is also known as polyethylene oxide (PEO) or polyoxyethylene (POE), depending on its molecular weight.
PEG is soluble in water and miscible in all proportions with any other grade of PEG (after melting, if necessary).PEG also is soluble in methanol, ethanol, acetonitrile, benzene, and dichloromethane, and is insoluble in... + continue reading
Wednesday, March 7, 2018 - 10:24
Caustic soda(NaOH) is one of most commonly used chemical in industry. Caustic soda is a solution of sodium hydroxide (NaOH) in water. It is a strength based on a wide range of applications in various industries.
It is mainly used in the manufacturing of pulp and paper, alumina, Soap, detergents, petroleum products and chemical products as well as it is used for water treatment, food, textile, metal processing, mining, glass making. In the laboratory, Sodium hydroxide has been used extensively to remove proteins from ion exchange,... + continue reading
Tuesday, March 6, 2018 - 18:30
Calcium Carbonate is a chemical compound with the formula CaCO₃.Calcium Carbonate is a nanoparticle acting as filler. Solves typical problems for surface finishing like corrosion and scratch. Increases surface hardness, improves UV light resistance and antiseptic effect. Offers possibility to replace surface chrome passivation. Also decreases wear and friction coefficient. Recommended for paints, galvanic coatings and in ink applications.
It is a common substance found in rocks as the minerals calcite and aragonite and is the main... + continue reading
Tuesday, March 6, 2018 - 18:28
Hydrogen Sulfide scavengers’ supplier widely used in hydrocarbon and chemical processing facilities because hydrogen sulphide is very toxic that causes problems in both the upstream and downstream in oil and chemical industry.
In large production facilities, the H2S solution used to remove gas process stream to install regenerative systems for sour gas. After absorbing the H2S the chemical regenerated, usually by heating and reused in the system.
We have ready stock of all material in our Fujairah plant and can also deliver the material with... + continue reading