How to Use Disc Separator Cleaner (RXSOL-16-1007-025)
-
Prepare the Cleaning Solution:
-
Dilute the Disc Separator Cleaner with water.
-
Typical dilution ratio: 1 part cleaner to 3–5 parts water, depending on the level of contamination.
-
-
Soak the Discs:
-
Place the stainless steel discs or separator parts into a suitable soaking tank.
-
Pour the prepared solution until the parts are fully submerged.
-
-
Soaking Time:
-
Allow the parts to soak for 2 to 4 hours.
-
For heavily carbonized or greasy components, longer soaking may be needed (overnight if necessary).
-
-
Light Agitation (if possible):
-
Occasionally stir the solution or gently agitate the parts to speed up the cleaning process.
-
-
Rinsing:
-
After soaking, remove the parts and rinse thoroughly with fresh water.
-
Make sure all chemical residues are completely removed.
-
-
Drying:
-
Allow the parts to air dry or wipe them with a clean, dry cloth before reassembling.
-
-
Safety Tips:
-
Always wear gloves, goggles, and suitable protective clothing.
-
Ensure good ventilation during use.
-
Dispose of used solution according to local regulations.
-
Disc Separator Cleaner manufacturer, Exporter and supplier in Mumbai, Gandhidham Kandla Surat, Kolkata Haldia, Ennore Chennai, Vizag Visakhaptnam, Fujairah, Abudhabi, Ajman, Dubai, Sharjah UAE Middle East, Sohar, Barka Muscat Oman, Kenya Africa, Canada, Sudan Yemen