Filter Cleaner is Very useful to clean fuels precipitation of paraffin and asphalt Extremely and effectively removes tenacious lubricating oils deposits from FILTER, Available in 25 and 210 Ltr packing
Very usefull to clean Fuels precipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh. It is heavy duty emulsifying liquid , which is Extremely and effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators. Effective cleaning of fine meshes is achieved by soaking in RXSOL-16-1095-025 followed by blasting with compressed air using a cleaning gun.
Mechanical cleaning (scrubbing and brushing )damages the filter which results in poor performance .
Cleaning process and requirement of time depends on the type of the contamination. With fuels recipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh.
RXSOL-16-1095-025 can be undercooled or overheated during storage but remains fully usable when returned to normal temperature.
MESH CONTAMINATED WITH HEAVY OIL:
Elements contaminated with heavy oil must be soaked in a standard commercial aromatic solvent. After soaking the elements are cleaned by high pressure Cleaning Device using RXSOL-16-1095-025 solution.
INSTRUCTIONS FOR USE:
Use of RXSOL-16-1095-025 is not restricted to a particular method of cleaning. Depending on the operating conditions, RXSOL-16-1095-025 can be used in a dip bath, in a spraying plant, in steam jetting or in manual application using a cloth, brush or sponge. It can be used warm or cold. RXSOL-16-1095-025 is miscible with water - even seawater.
Concentration for mesh cleaning: 1 : 2,5
Temperature: up to a maximum of 60 °C
The concentration depends on the type and thickness of the adhesive substance to be removed. When used in concentration below 1 : 30 rinsing is usually not required. No visible film remains on the surface
May be used directly or diluted in the ratio of 1 part concentrate to 5 parts water, ( or 1 . Ratio of any solvent like diesel )
Manual Cleaning of the Candle Filter Elements
NOTE ::: Drained the automatic filter by automatic back-flushing (i.e. all filter chambers).
1 Then soak the filter element assembly, with the openings of the candle elements facing down in a suitable tank filled with RXSOL-16-1095-025 solvent.
2 The soaking time is completely depends on cleaning method :
a)In cold RXSOL-16-1095-025 cleaner the maximum soaking time is 24 hours.
b)In hot solution the maximum soaking time is 12 hours.
3. After soaking remove the whole filter element assembly from the tank and for dry to keep all parts on place it on a suitable perforated sheet metal.
4. Then you may blow compressed air through the candles from the inside to the outside.
5. After this procedure the complete filter element assembly should be immersed in fresh cleaner, with the candle element opening down-wards, and rinsed through with an up and down motion.
6 Allow the filter element assembly to drain again and dry it by blowing compressed air through it again from the inside to the outside. The manual cleaning procedure described here has produced adequate results (ca. 60 % clean) in similar applications.
Note : CLEANING of filter can be enhance with high pressure machine.
RXSOL-16-1095-025 is a fluid cleaning and degreasing agent with a wide range of application. It can be used for practically all cleaning and degreasing purposes.
RXSOL-16-1095-025 cleans rapidly, thoroughly and extremely economically.
Use of RXSOL-16-1095-025 renders safety precautions superfluous.
RXSOL-16-1095-025 has these outstanding characteristics without exhibiting the
isadvantages of solvent cleaners.
RXSOL-16-1095-025 is non-flammable and free from caustic
This product is biologically degradable
RXSOL-16-1095-025 can be undercooled or overheated during storage but remains fully usable when returned to normal temperature.
DUBICHEM Marine International keeping ready stock of Filter Cleaner Engine Lube Oil in UAE Middle East. Engine Oil Filter Cleaner is available in 25 Ltr / 210 Ltr packing.
DUBICHEM Marine International well know Filter Cleaner Manufacturer and supplier of Filter Cleaner Engine Lube Oil in UAE Middle East.
Filter Cleaner Engine Lube Oil Distributor in UAE Middle East - UAE. To get discounted price of Filter cleaner, pl. feel free to email us - uae@dubichem.com
Filter Cleaner Engine Lube Oil manufacturer in Fujairah.
#EngineOilFilterCleaner
#FilterCleaner_ManufacturerSupplier
Filter Cleaner Engine Oil supplier in Mumbai, Nhava seva, Kandla, Ennore - Chennai, Visakhapatnam - Gangavaram, Kolkata - Haldia - Paradip, Fujairah, Abu Dhabi, Sharjah, Dubai, Barka Oman Muscat, Canada
Filter Cleaner Engine Oil specially formulated for cleaning of lube and fuel filters, machinery parts and tools. Filter Cleaner Engine Oil powerful cleaning action makes it no1 marine cleaner in engine oil cleaning operation.
Then Remove by unscrewing the Oil Filter from circulating system then completely Drain Oil: Place a drain pan beneath the oil filter to catch any residual oil.
3. Drying the Filter: Use air compressor to remove excess of chemical liquid and moisture and then keep FILTER to dry fully.
5. After Cleaning Steps: Refill Oil: Replace any lost oil to maintain the correct oil level.
NOTE : Regularly cleaning your reusable oil filter ensures efficient filtration and contributes to the longevity of your engine. Always consult your equipment's manual for specific instructions related to your model.
Filter Cleaner for Engine Oil - Effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators
RXSOL 79127, Care clean Filter, Engine Oil Filter Cleaner, BOLL CLEAN 2000
