RXSOL Organge BAHE Cleaner is a citrus-solvent based cleaner specifically developed for cleaning brazed aluminum heat exchanger (BAHE) surfaces and associated process equipment contaminated with hydrocarbon deposits, compressor oils, grease, oily residues and other organic fouling.
The product utilizes the high solvency of Sweet Orange Extract / Orange Oil to penetrate and loosen oily and hydrocarbon-based deposits. Orange, sweet, ext. is identified as extractives and derivatives obtained from Citrus sinensis and is listed for industrial cleaning applications.
The formulation is intended to provide effective organic-deposit removal while avoiding the aggressive acidic descaling chemistry commonly associated with mineral-scale cleaners.
Brazed Aluminum Heat Exchangers / Aluminum Heat Exchanger Systems cleaning liquid
- Compressor oil
- Lubricating oil
- Hydrocarbon residues
- Grease
- Process oils
- Oily dust deposits
- Carbonaceous/oily films
- Organic process residues
- Light-to-moderate sludge
- Hydrocarbon contamination
- Brazed aluminum plate-fin heat exchangers
- Aluminum heat exchanger cores
- Air coolers
- Gas coolers
- Compressor heat exchangers
- Refrigeration heat exchangers
- LNG-related aluminum heat-transfer equipment
- Process gas coolers
- Chiller heat exchangers
- Oil coolers
- Condensers
- Evaporator systems
- Heat-transfer equipment contaminated with oil
The citrus solvent penetrates oily deposits and reduces their adhesion to the metal surface. With circulation, agitation or soaking, the deposited organic material is progressively loosened and dispersed into the cleaning solution.
Key Features of RXSOL Orange BAHE Cleaner for Aluminum Heat Exchanger
- Citrus-based solvent cleaning technology
- Excellent solvency for oils and hydrocarbon residues
- Effective against grease and oily deposits
- Suitable for circulation or soak cleaning
- Low-residue cleaning when properly rinsed
- Non-acidic cleaning technology
- Useful for heat-transfer equipment contaminated by organic fouling
- Pleasant citrus character compared with conventional petroleum solvents
- Can be used as a pre-cleaner before subsequent water-based treatment
| Property | Typical Value |
|---|---|
| Appearance | Clear to slightly hazy yellow/orange liquid |
| Colour | Yellow to orange |
| Odour | Characteristic citrus/orange |
| Chemical type | Citrus solvent / organic cleaner |
| Main active | Sweet Orange Extract |
| Water solubility | Limited / practically insoluble |
| Solvent character | Strong organic solvency |
| pH | Not applicable |
| Specific gravity @ 25°C | Typically ~0.84-0.90 |
| Flash point | 45°C |
D limonene supplier and exporter.
Complete range of Heat Exchanger Cleaning Chemicals:
Heat Exchanger Orange Cleaner in India, Orange Oil Heat Exchanger Cleaner exporter in India.
Orange BAHE Cleaner manufacturer supplier. Brazed Aluminum Heat Exchanger Cleaner manufacturer supplier.
Orange Brazed Aluminum Heat Exchanger Cleaner exporter and supplier in Muscat, Barka, Oman, Fujairah, UAE Middle East, Sharjah, Abudhabi, Dubai, Mumbai, Navi mumbai, Gandhidham, Chennai, Kolkata, Visakhapatnam, Patna, Tata, Ranchi, Sudan, Nairobi Kenya
Cleaning Chemical for BAHE Aluminum Fins – RXSOL-39-8347-210
RXSOL BAHE Aluminum Fin Cleaner Supplier in India, UAE, Oman, Qatar & Saudi Arabia
Product Name: Cleaning Chemical for BAHE Aluminum Fins
SKU: RXSOL-39-8347-210
Brand: RXSOL
Application: Cleaning of aluminum fins, heat-transfer surfaces and associated equipment
RXSOL-39-8347-210 Cleaning Chemical for BAHE Aluminum Fins is a specialized industrial cleaning chemical developed for the effective removal of dirt, atmospheric deposits, oily contamination, grease and accumulated fouling from aluminum fin surfaces.
Aluminum fins used in air coolers and heat-transfer equipment provide a large surface area for efficient heat exchange. Over time, contamination between the fins can restrict airflow and reduce heat-transfer efficiency. RXSOL-39-8347-210 helps remove these deposits while allowing maintenance teams to clean difficult-to-access finned surfaces effectively.
RXSOL supplies BAHE aluminum fin cleaning chemicals to industrial customers across India, UAE, Oman, Qatar and Saudi Arabia, supporting refineries, petrochemical plants, power facilities, oil & gas operations, process industries and industrial maintenance contractors.
What is BAHE Aluminum Fin Cleaning?
BAHE or finned heat-exchanger surfaces contain closely spaced aluminum fins designed to maximize heat transfer. Because of the narrow spacing and large surface area, these fins can progressively collect:
- Dust and sand
- Oil mist
- Grease
- Atmospheric contamination
- Hydrocarbon residues
- Process deposits
- Salt and environmental contamination
- General industrial dirt
The combination of dust and oily contamination can produce stubborn deposits that are difficult to remove using water alone.
RXSOL-39-8347-210 is designed to penetrate and loosen these contaminants so they can be removed during the cleaning and rinsing process.
Why Cleaning Aluminum Fins is Important
A contaminated fin surface can restrict airflow through the heat exchanger and create an insulating layer between the process equipment and cooling air.
Proper periodic cleaning can help:
Improve heat transfer → Restore airflow → Reduce fouling → Maintain equipment performance → Reduce unnecessary operating stress.
Cleaning is therefore an important part of preventive maintenance for finned heat-transfer equipment operating in dusty and demanding industrial environments.
Applications
RXSOL-39-8347-210 is suitable, subject to equipment and material compatibility, for cleaning:
- BAHE aluminum fins
- Air-cooled heat exchangers
- Fin fan coolers
- Aluminum heat-transfer surfaces
- Industrial air coolers
- HVAC aluminum coils
- Condenser fins
- Radiator fins
- Process cooling equipment
- Petrochemical heat-exchange equipment
- Refinery cooling equipment
- Power-plant cooling systems
Key Benefits
RXSOL Cleaning Chemical for BAHE Aluminum Fins provides several advantages for industrial maintenance operations:
- Effective removal of accumulated dirt and oily deposits
- Designed for aluminum fin cleaning
- Penetrates deposits between closely spaced fins
- Helps restore clean heat-transfer surfaces
- Suitable for industrial maintenance programs
- Can reduce dependence on aggressive mechanical cleaning
- Suitable for spray and circulation/application systems where appropriate
- Useful for heavily contaminated equipment in dusty environments
- Suitable for planned shutdown and preventive-maintenance cleaning
Recommended Cleaning Procedure
Before application, isolate the equipment according to the plant's approved maintenance procedure.
Remove loose dust and debris where practical. Prepare the required concentration of RXSOL-39-8347-210 according to the severity and nature of the contamination.
Apply the cleaning solution evenly to the aluminum fin surfaces using a suitable low-pressure spray, foaming system or other approved application method. Allow sufficient contact time for the cleaner to penetrate the deposits.
Do not allow the chemical solution to dry completely on the aluminum surface.
After the required contact period, rinse thoroughly with clean water until loosened contamination and chemical residues have been removed.
When pressure washing is used, excessive pressure should be avoided because thin aluminum fins can easily be bent or physically damaged.
For critical equipment, a small compatibility test should be performed before full-scale application.
Cleaning Heavily Fouled Fin Fan Coolers
Where fins are contaminated with a combination of oil, grease, sand and atmospheric dust, cleaning efficiency depends on achieving adequate chemical contact throughout the depth of the fin pack.
For heavily contaminated systems, cleaning may require repeated application rather than increasing chemical strength excessively.
The objective should be to loosen contamination progressively while minimizing unnecessary chemical exposure of the aluminum surface.
Aluminum Compatibility is Critical
Aluminum requires greater chemical consideration than ordinary carbon steel.
Highly alkaline cleaners and strongly acidic products can attack aluminum if their chemistry, concentration and contact time are unsuitable. Therefore, general-purpose caustic degreasers should not automatically be used on aluminum fins.
RXSOL-39-8347-210 should be applied according to its approved dilution, contact-time and rinsing procedure. Equipment metallurgy and manufacturer recommendations should also be reviewed before chemical cleaning.
RXSOL BAHE Aluminum Fin Cleaner Supplier in India
RXSOL supplies Cleaning Chemical for BAHE Aluminum Fins RXSOL-39-8347-210 for industrial maintenance requirements throughout India.
Supply can be supported for major industrial and port locations including:
Mumbai, Navi Mumbai, Taloja, Nhava Sheva, Pune, Gujarat, Ahmedabad, Vadodara, Surat, Dahej, Hazira, Kandla, Mundra, Chennai, Visakhapatnam, Kolkata, Haldia and other industrial locations across India.
The product is suitable for requirements from refineries, petrochemical plants, power plants, engineering companies, maintenance contractors and process industries.
BAHE Aluminum Fin Cleaner Supplier in UAE
RXSOL supplies aluminum fin cleaning chemicals throughout the United Arab Emirates, including:
Dubai, Jebel Ali, Abu Dhabi, Mussafah, Ruwais, Sharjah, Hamriyah, Fujairah, Ras Al Khaimah and Ajman.
The product is particularly relevant for UAE industrial facilities where sand, dust, salt and oily atmospheric contamination can rapidly accumulate on exposed air-cooled heat exchangers and fin fan coolers.
BAHE Aluminum Fin Cleaner Supplier in Oman
RXSOL-39-8347-210 is available for industrial requirements across Oman, including:
Muscat, Sohar, Salalah, Duqm, Sur, Barka and other industrial areas.
Applications include oil & gas facilities, refineries, petrochemical plants, utilities, power facilities and industrial maintenance operations.
BAHE Aluminum Fin Cleaner Supplier in Qatar
RXSOL supplies aluminum fin and heat-exchanger cleaning chemicals in Qatar for industrial maintenance and process-equipment cleaning.
Supply requirements can be supported for Doha, Ras Laffan, Mesaieed and surrounding industrial areas, subject to quantity and logistics requirements.
BAHE Aluminum Fin Cleaner Supplier in Saudi Arabia
RXSOL also supplies RXSOL-39-8347-210 for industrial customers across Saudi Arabia.
Key industrial supply locations include:
Dammam, Jubail, Ras Tanura, Al Khobar, Riyadh, Jeddah and Yanbu.
The product is suitable for the demanding cleaning requirements of Saudi refineries, petrochemical complexes, oil & gas installations, power plants and industrial facilities where fin fan coolers operate under high dust-loading conditions.
Industries Served
RXSOL BAHE Aluminum Fin Cleaner is suitable for maintenance programs across:
Oil & Gas | Refineries | Petrochemicals | Power Plants | LNG Facilities | Fertilizer Plants | Chemical Plants | Utilities | Marine & Offshore | Manufacturing | HVAC & Industrial Cooling
Why RXSOL?
RXSOL provides specialized industrial cleaning, descaling, degreasing and heat-exchanger maintenance chemicals for demanding industrial environments.
For BAHE and aluminum fin cleaning applications, the cleaning program can be selected according to the type of contamination, metallurgy, equipment configuration and required cleaning method, rather than relying on an excessively aggressive general-purpose cleaner.
BAHE Aluminum Fin Cleaning Chemical Supplier India, UAE, Oman, Qatar & Saudi Arabia | RXSOL
RXSOL-39-8347-210 BAHE Aluminum Fin Cleaning Chemical for fin fan coolers, air-cooled heat exchangers and aluminum fins. Supplier in India, UAE, Oman, Qatar and Saudi Arabia.
BAHE aluminum fin cleaner, BAHE cleaning chemical, BAHE aluminum cleaning chemical, RXSOL-39-8347-210, aluminum fin cleaner, aluminium fin cleaning chemical, fin fan cleaner, fin fan cooler cleaning chemical, air cooled heat exchanger cleaner, ACHE cleaning chemical, aluminum heat exchanger cleaner, refinery fin fan cleaner, petrochemical fin cleaner, BAHE cleaner India, BAHE cleaner Mumbai, BAHE cleaner Navi Mumbai, aluminum fin cleaner UAE, BAHE cleaner Dubai, fin fan cleaner Abu Dhabi, BAHE cleaner Oman, aluminum fin cleaner Sohar, BAHE cleaning chemical Qatar, fin fan cleaner Ras Laffan, BAHE cleaner Saudi Arabia, fin fan cleaner Jubail, aluminum fin cleaner Dammam, heat exchanger cleaning chemical supplier.
BAHE Cleaner, Brazed Aluminum Heat Exchanger Cleaner, Orange Heat Exchanger Cleaner
