5, 20 ltr, 35, 50, 210 ltr and also in IBC TANK. mail us for factory sale discounted price.
RXSOL ANTIFREEZE GREEN Corrosion Inhibitor
Introduction
Antifreeze compound for cooling water systems , It is a Very effective blend of GLYCOL classified chemicals along with CORROSION inhibitor to protects all engineering precious metal including aluminium . Its chemically treated layer protect radiators and engines, against rust and corrosion. Its proper dose in cooling system gives full protection from corrosion.
It is biodegradable and does not present an environmental problem.
Solution Strength :
25 Ltrs RXSOL-16-4020-020 : 75 Ltrs Water gives freezing protection up to -140C "or" 25% solution (1 part anti-freeze to 3 parts water)
For extra cold / winter climate , increase to a 33% solution (1 part anti-freeze to 2 parts water) to give freezing protection down to -170C.
EYES : Irrigate copiously with clean, fresh water for at least 15 minutes. Seek medical advice.
SKIN : Wash immediately with plenty of water. Remove contaminated clothing. If irritation persists seek medical attention. Wash contaminated clothing before using them.
INHALATION : Remove to fresh air. If breathing is irregular seek medical advice.
INGESTION : Obtain immediate medical attention. Induce vomiting only if indicated by the doctor. Never give anything by mouth to an unconscious person.
Coolant Green is an inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and alloys that are used in cooling systems.It is especially appropiate for the use in heavy-duty engines such as those used in trucks, ships and lokomotives.
• High performance corrosion inhibitor
• Being a nitrite free product it is compatible also with zinc - coated piping
• Easy control test with refractometer.
Antifreeze
APPLICATIONS
Antifreeze Special is free from amine, phosphate and nitrite etc. And uses as engine Antifreeze as well as coolant. This product is based on ethylene glycol. It contains a corrosion inhibitor, salts of organic acids and silicates (Si-OAT). It protects all metallic parts against corrosion and deposits in the cooling system.
Benefit
The product protects all parts of cooling system from frost, oxidation and overheating.
It has long-term protection against corrosion for all materials used in the engine and radiator construction, such as cast iron, aluminium, copper and solder alloys as well as a good compatibility with hoses, seals or plastics.
It contains carefully selected amine, nitrite, boron and phosphate free inhibitors and is therefore environmentally friendly.
At concentration of 10% by volume, Coolant Green Antifreeze affords excellent protection against cavitation and corrosion to all metal and alloys which are used in cooling system, such as aluminium, ferrous and yellow metals.
The coolant should be prepared with water that is clean but not too hard. The following types of water are unsuitable: sea water,mixture of sea water and fresh water, salt water and industrial waste water. The analytical values of the water should be within the following limits :
Water hardness : 0 - 100 ppm
Chloride contents: max 100 ppm
Sulphate contents: max 100 ppm
The water must be treated by suitable means if it does not fulfill these requirements, i.e. by adding softened, or distilled or deionized water. Excessive sulphate or chloride contents can also be reduced by adding distilled or deionized water.
Antifreeze Coolant Liquid Manufacturer, Exporter and supplier in Mumbai, Chennai, Kolkata, Visakhapatnam, Gandhidham, Fujairah, Abudhabi, Dubai, Sharjah, UAE Middle East Gulf, Muscat Barka Sohar Oman, Kenya Nairobi Uganda Africa, Canada, Sudan, Yemen
