250 ml, 500 ml, 1 Ltr.
Salt Neutraliser is a clear aqueous solution designed to be applied directly to masonry, render or plaster that has been affected by ground water or efflorescing (white, fluffy) salts.
It is also recommended as part of treatment after the insertion of a damp proof course to existing masonry, which should include replastering to an approved specification.
How to use Salt Neutralizer for Plaster, Mansonry Construction work
- Brush away or remove all loose salts
- Thoroughly soak the affected area with clean tapwater
- Apply Salt Neutraliser by brush or roller to areas showing salts contamination. Under most circumstances one application will be sufficient. Where heavy salting on old brickwork (eg. chimney breasts) is being treated use Salt Neutraliser as supplied. On new plaster finishes or where the salting is light Salt Neutraliser can be diluted with water up to 50/50.
- Some frothing may occur which is due to the reaction of Salt Neutraliser with the salts and you should allow some time for the neutralizing action to be completed. A white deposit may be left on the surface where original efflorescence has taken place and this can be difficult to remove.
- If re-decoration is to be applied to the treated surface the area should be washed with water and allowed to dry. Do not re-decorate at any time until all treated areas are thoroughly dry.
Dosage
Use directly onto old masonry, render or plaster, or dilute 50:50 with water to apply to new plaster suffering from efflorescence.
Coverage of Salt Neutralizer
1 litre of concentrate should treat 5 to 10 m²
Reason for Salt formation in plaster, masonry work
As a result of rising dampness, salts contained in ground water are absorbed into the structural masonry of the building and subsequently into the internal plaster finishing coat. If the rising damp has been severe the plaster finish can de-bond and visual evidence of this potential problem can often be noted by the presence of salt deposits on the internal plaster surface. In such severe circumstances the plaster finish must be removed and re-plastering carried out in accordance with the appropriate specification, to prevent any residual salts in the structural masonry migrating into new plaster finishes. There are, however many situations where the type of salts within the masonry are such that the plaster finish remains in good condition.
In these cases Salt Neutraliser can be used to neutralise the salts in the sound plaster finish thus saving considerable time and expense by not having to re-plaster these areas. There are many other occasions where, even after re-plastering, salts efflorescence can be seen on the new plaster finish. This often leads to a concern that the damp proof course has failed when, in fact, in the majority of cases the efflorescence is due to other factors such as drying out, plumbing or rainwater leaks, condensation or salts in construction materials or salty bricks. Under these circumstances Salt Neutraliser is an ideal product to treat the problem.
#SaltNeutraliserforPlaster_in_UAE
#SaltNeutraliserforPlaster_in_OMAN
#SaltNeutraliserforPlaster_in_INDIA
#SaltNeutraliserforMasonry
#SaltNeutraliserforConstruction
Salt Neutralizer for Plaster Masonry Construction work supplier in Mumbai, Kandla, Kolkata Durgapur West Bengal, Varanashi, Patna, Paradip, Howrah, West Bengal, Navi mumbai MIDC, Visakhapatnam, Chennai, Ennore, Dubai, Fujairah, Sharjah, Ajman, Abudhabi, Ruwi Barka, Muscat, Barka, Oman
Salt Neutralizer
