5, 10, 20, 25, 50, 210, and also available in 1000 Ltrs IBC TANK. The remarkable things about this product are free from any ALKALI materials which is causing a Greasy layer on contact with the Fatty Acid of Veg and animal oil. HCF is neutral as it is clear from the name, Its neutral nature easily emulsifies oil residue without the formation of grease during cleaning hrs.
Hydrocarbon Remover HCF This product is very common to use for removing of traces HYDROCARBONS from tank, After cleaning of TANKS from solvent base tank cleaning materials hydrocarbon may still be left on tank surfaces. with Hydrocarbon Remover HCF is very effective to remove animal and vegetable oils, petroleum products residues from tank surface.
For removal of traces HYDROCARBONS from tank, After cleaning of TANKS from solvent base tank cleaning materials . when possibilities of next cargo will contaminate with hydrocarbon.
Neutral HCF supplier and stockist at all Indian and UAE - Middle East Coastal. HCF Neutral chemical importance is to emulsify vegetable oils and animal oils and fats residue with less foaming effect. Chemically if you can understand oil and fat which contain FATTY ACID while the general cleaner is alkaline in nature which is resulting greasy mass oncoming contact with Fatty Acid and Alkali cleaning material. To avoid the formation of GREASE like substance inside the tank, it is very important to take care of an alkaline cleaner with such cargo. On the other hand HCF Neutral ( free from any kinds of alkali mixture ) emulsifying oils particle and makes water soluble to remove from zinc-silicate coated tanks surface.
APPLICATION, FEATURES & BENEFITS
Completely miscible with sea water and fresh water.
Suitable for use on zinc-silicate coatings and most common metals.
Note : Limited application on epoxy coatings. The maximum concentration is 10% and a maximum temperature of 60°C.
Usage Area : Oil and hydrocarbon remover at aluminum and zinc-silicate coated tanks.
Appearance Physical Status (20°C) : Liquid
Color : Clear colorless
Odour : Soft
pH (in %1 solution ) : 7.0-8.0
Density : 1.00-1.10 gram / cm3
Solubility in Water : Completely.
Neutral cleaner to avoid chemical reaction of oil and Fat which is causing grease layer on the tank surface. While Alkaline cleaner reacts with fatty acid present in oil and fat and causing the formation of sticky greasy mass on the tank surface this is the reason why we should avoid uses of any alkaline materials for removal of vegetable, animal and mineral oils etc... HCF Neutral product based on highly efficient dissolving and low foaming nonionic surface-active agents.specialized for the removal of vegetable, animal and mineral oils as well as fats.
DIRECTIONS FOR USE / APPLICATIONS & DOSAGE RATE
Spray Method: After cleaning tanks with TANK CLEANER or TANK CLEANER EXTRA and rinsing the tanks with hot fresh water at a maximum temperature of 60°C, spray 15% solution of Hydrocarbon Remover HCF freshwater solution on the hot tank surfaces and let it react for minimum 30 minutes. Rinse thoroughly with hot DeIonized Water (D.I. Water).
Spot Cleaning: Spray the surfaces with undiluted Hydrocarbon Remover HCF. It can be applied either by brush, pump or a spray unit. Apply the chemicals until the tank surfaces are well soaked and let the product react for at least 30 minutes. Then rinse all tank surfaces with water at max. 60°C for 45 - 60 minutes.
Recirculation Method: Depending the contamination degree prepare 2-5% Hydrocarbon Remover HCF solution and circulate the tanks for 2-6 hours. Cleaning solution must be around 40 – 60 ºC during circulation. Rinse the tanks with water after cleaning finishes.
FAQs — Hydrocarbon Remover HCF Remover1) What is Hydrocarbon Remover used for?A powerful, low-foaming cleaner formulated to soften and remove baked-on drying oils. Ideal for cleaning after handling animal and vegetable oils, fish oils, tall oils, tung oil, and similar residues. 2) Is it safe for personnel?Yes. It is low in toxicity, free from hydrocarbon solvents, and minimizes hazards during handling. Standard PPE such as gloves and goggles is still recommended. 3) How effective is it on stubborn residues?It has exceptional solvency power on soils and oily matter, making it effective even on hardened or baked-on deposits. 4) Is it suitable for all industries?Yes. While widely used in marine cleaning, it is also effective in food processing, oil handling, and industrial maintenance where oils and greasy residues are present. 5) Does it contain hydrocarbon solvents?No. It is completely free from hydrocarbon solvents, making it safer for the environment and personnel. |
Question : How to clean veg oil ?
Then follow genreal tank cleaning manual of SHIP. Common addopted method for tank cleaning is as follows :::
Hydrocarbon Remover Hcf supplier in UAE Middle East Oman India. Hydrocarbon Remover Hcf largest stockist distributor and supplier in Mumbai Kandla Gandhidham Mundra, Kolkata Haldia, Chennai Ennore, Visakhapatnam Gangavaram, Paradip, FUjairah Dubai Jerf Ajman, Abudhabi, Sharjah, BARKA RUWI Muscat Sohar Barka Oman, Nairobi Mombasa Kenya Africa
NATURAL HCF water based, HYDROCARBON CLEANER 210 Ltr pack
